• Insert plug into wall socket. • Raise front door to allow applicators to be inserted. • Remove caps from applicators and place rollers on. Turn rollers until they stop – so not overturn them! • Insert applicators into heater with rollers facing the metal heater plate. • Place strip into the back compartment (left side) Place 2 additional applicators in the back compartment (right side) • Close the door as this permits faster heating time. • Switch heater on. Set variable heat switch to the warmest (Full clockwise) • After 30 minutes turn variable heat switch to centre position – this can be adjusted to therapist requirements (Depending on room temperature, voltage and personal preferences) • Remove wax applicator from heater, face roller downwards and ensure no air bubbles, then insert into thermo sleeve. • Roll the wax onto a strip to test for flow and get wax all over roller. • Apply to skin - apply both legs in front, strip, then apply back legs. • Only after ½ leg complete is it necessary to remove thermo sleeve and place back into heater.

Glyceryl Hydrogenated Rosinate, Triethylene Glycol Hydrogenated Rosinate, Beeswax (Cera Alba, Cire d'abeille), Chamomila Recutita (Matricaria) Flower Extract, Carthamus Tinctorius (Safflower) Seed Oil, Methylparaben, Propylparaben, Azulene