• Insert plug into wall socket. • Raise front door to allow applicators to be inserted. • Remove caps from applicators and place rollers on. Turn rollers until they stop – so not overturn them! • Insert applicators into heater with rollers facing the metal heater plate. • Place strip into the back compartment (left side) Place 2 additional applicators in the back compartment (right side) • Close the door as this permits faster heating time. • Switch heater on. Set variable heat switch to the warmest (Full clockwise) • After 30 minutes turn variable heat switch to centre position – this can be adjusted to therapist requirements (Depending on room temperature, voltage and personal preferences) • Remove wax applicator from heater, face roller downwards and ensure no air bubbles, then insert into thermo sleeve. • Roll the wax onto a strip to test for flow and get wax all over roller. • Apply to skin - apply both legs in front, strip, then apply back legs. • Only after ½ leg complete is it necessary to remove thermo sleeve and place back into heater.

Glyceryl Hydrogenated Rosinate, Triethylene Glycol Hydrogenated Rosinate, Beeswax (Cera Alba, Cire d’ Abeille), Methylparaben, Propylparaben