PREP Perform a dry manicure Use a 180/220 buffer and lightly remove gloss from nail plate Clean and ensure no dust particles on nails Apply a thin layer of LeoLaque Bonder to the surface of the natural nail and cure it under a LED lamp for 30 seconds. Note: Be sure not to apply it to the skin around the nail or onto cuticles. BASE Apply thin layer of base coat and ensure to cap the front as well. Note: Be sure not to apply it to the skin around the nail or onto cuticles. Cure it under a LED lamp for 60 seconds. COLOUR Apply thin layer of colour and cap the front as well. (At this stage some colours might appear opaque – do not try and apply first coat too thick.) Cure it under a LED lamp for 30 seconds. Apply second coat of colour and cure for 30 seconds. (If you’re haven’t achieved a solid colour after this you can apply a third coat and cure – provided all you “layers” are very thin and properly cured.) Note: Be sure not to apply it to the skin around the nail or onto cuticles. If you have accidently touched the skin, clean with orange stick or brush before curing. Not cleaning before curing, will result in lifting. TOP Apply a thin layer of topcoat and ensure all the edges are sealed. Cure it under a LED lamp for 60 seconds. Depending on the topcoat you’ve used, either gel mani complete or use alcohol wipes to remove tackiness. Note: Be sure not to apply it to the skin around the nail or onto cuticles. If you have accidently touched the skin, clean with orange stick or brush before curing. Not cleaning before curing, will result in lifting.

Acrylates Copolymer, Tricyclic Decane Dimethanol Diacrylate, Isobornyl Acrylate, Cellulose Acetate Butyrate, Citronellol, Dimethicone, CI60725, Trimethyl benzoyl Diphenyl phosphine Oxide